Jewelry Cherry

Information of Cubic Zirconia

2009-05-31T10:55:00.001-07:00

Cubic Zirconia (CZ)

Gemologist scientists developed Cubic Zirconia,CZs, as a dense clear material through which laser light can be reflected. It is similar to rough diamonds mined in Africa and is cut and polished by an expert diamond cutters to exact specifications. That’s why gemologists agree that cubic zirconia is the finest diamond simulation because it comes closer than any other gem material to matching the characteristics of a diamond. Most people, even trained gemologists, cannot tell the difference with the naked eye.

Cubic Zirconia is made up of zirconium oxide and yttrium oxide fired at 5,500 degrees Celsius in the laboratory. A cubic zirconia weighs 75% more than loose diamond with the same carat weight. Like diamonds, the best cubic zirconia are colorless (or white) and don’t lose their brilliance.
There are three classic grades or cuts of cubic zirconia: Commercial, Regular and Custom. Most Cubic Zirconia manufacturers use the less expensive regular-cut grade with semi-polished to reduce it’s cost. Pata Jewelcloning use only the finest Custom cut “Cubic Zirconia” so Pata cubic zirconia is undetectable to the jeweler’s naked eye.

One of the ways to tell the difference between a cubic zirconia and a real diamond is to look at the cubic zirconia under 10X magnification. You can see the facets do not point properly and where facets intersect, it is not a straight line, but the intersection is more rounded than the diamond’s facets. For the accuracy of classification, only the electronic device would be use to tell the difference.

Pata Cubic Zirconia is unique. Each stone is made with the finest cubic zirconia technology available in the world today. The gems are fired then cut and polished exactly like real diamonds by our expert craftsmen, each stone is fully faceted like a diamond which no less than 58 facets like those of real diamond, and placed in 24kt gold plated settings designed to emphasize the fire and brilliance of the CZ’s.

Pata’s impeccable White Gold over sterling silver finish provides a precious metal with an exact platinum appearance. Pata Vermeil is no less than five microns of 24kt gold over precious sterling for an exact gold appearance like all fine jewelry.

Pata Jewelry Care

2009-05-31T10:53:00.002-07:00

Pata' Jewelry Care. Care for it exactly as if it were real. Given proper cleaning, the cubic zirconia will retain its beauty for years. The best cleaning agent for cubic zirconia is liquid dishwashing detergent. But, other cleansers can be used, preferably those without ammonia or alcohols. Natural skin oils, soap, and dirt cause a film that dulls the beauty and luster of the cubic zirconia, just as it dulls real diamonds.
Remember: a dirty diamond won’t shine either, so keep Pata Cubic Zirconia jewelry as clean as your fine jewelry.

Product of Pata Jewelcloning

2009-05-31T10:53:00.001-07:00

For product of Pata Jewelcloning, material is made of sterling silver 92.5% , plated with gold or platinum of 5 micron in thickness. (General product is plated only 0.25 to 1 micron in thickness to reduce production cost but Pata plates our product with 5 micron for durability and beauty as if fine jewelry.) Diamond used by Pata is Cubic Zirconia with quality of European Cut. Brilliant cut. Pata emphasizes on similarity to the real one as much as possible in facet, weight, and brightness of diamond. All production process is the same as that of real diamond. Thus, seeing with eyes alone cannot differentiate this product.
Products of Pata are handicrafts made by skillful craftsmen who work for fine jewelry production and plated with special thickness. Therefore, you can be confident that products of Pata are completely beautiful and look real; only price can tell the difference.

Differences between Products of Pata Jewelcloning and Products made of General Jewelry

2009-05-31T10:51:00.001-07:00

Differences between Products of Pata Jewelcloning and Products made of General Jewelry
Comparison	Pata Jewelcloning	Fine Jewelry	General imitation Jewelry
Material	Sterling silver 92.5 %	Real gold/platinum	Brass/Alloy
Diamond Real	Cubic Zirconia: European Cut	Grade Diamond/Gem	Cubic Zirconia: Low Quality
Plating	Plated with real gold and platinum of 5 micron in thickness	Plated with real gold and platinum of 1-2 micron in thickness	Plated with real gold and platinum of 0.25-1 micron in thickness
Price	20-366 US	200 - 24,391 US up	5 -15 US

Welcome To Jewelry Cherry

2009-05-31T09:49:00.000-07:00

Contacts Us :

E-Mail :

admin@jewelrycherry.com

sales@jewelrycherry.com